BRONZE PATINA KIT FREE

If you don’t have the luxury of time, let it dry for at least 8 hours, which is almost overnight.Ħ. A drying time of 24 to 48 hours is usually preferred since it ensures that the metal base has completely soaked in the patina and therefore accomplished the chemical process. Once you’ve coated the patina and acquired the appropriate shade and appearance, it’s critical to let it cure for the suggested amount of time. It also prevents excessive patina from being deposited, which would corrode the metal. As a result, you have a bit more control over the look than usual. Because you can see the colour, pattern, and style being formed as you layer up, and this provides for a lot of advantages. Patina’s attractiveness is best accomplished by gradually building the look rather than applying many coats back to back. And, for your own protection, make sure you’re wearing a mask when it’s being applied. Layer, layer, layer, but do so gradually and slowly. The actual effort begins now, with the application of the patina to the metal base. Our advice is to experiment with different tools on separate areas to see how the patina would look when applied with each of them. Will you apply it with a roller, a sponge, a paint brush, spray bottle or a spray gun? Each of these tools will influence how your patina develops and hence appears. Once you’ve settled on your patina chemical and metal base, determine how you’re going to apply it. Later in the blog, we’ll show you how different patinas look on different metals. Green, rust, black, and brown are the most commonly available patina colours. They will need to be coated with liquid metal before the patina chemical is applied.ĭifferent patinas yield different hues on metal.

Please keep in mind that patina cannot be applied directly to MDF or other base substrates. If not, the patina chemical will not react with it.

BRONZE PATINA KIT FREE

Also, be certain that your metal is exposed and free of oxides, oil and residues. Check with the manufacturer to see what base substrates the patina they produce can be applied on. Patinas mostly deal with metals and, to a lesser extent, wood, but they are primarily used to create an antique finish on metal. If you’re new to working with patina, keep reading as we take you through the process.Ĭheck that you’re using the correct base substrate. Patina is a naturally occurring phenomenon that we can now achieve by applying chemicals to accelerate metal oxidation.

Study room wall finished using liquid metal copper patina finish

Bronze patina kit